Heater Controller (110V / 220V)

MSRP: $99.95
Was: $89.99
Now: $84.99
(You save $14.96 )
(10 reviews) Write a Review
Calculated at Checkout

Our heater controller allows you to increase and decrease the heat output of internal heating elements, hotplates, and band heaters without the issues caused by thermostatic control, such as cycling. This allows you to run at maximum power during the heat-up process, and then reduce the heat for production. No wiring is necessary- just plug in your heater and go!

Unlike some controllers, our heater controller is designed for extended use specifically with high-power heat sources and will not overheat or become excessively hot.

Note:  Heater Controllers must have power draw at all times.  Turning on the Heater Controller without a heater plugged into the controller will damage the controller and void the warranty


  • 110V or 220V
  • 10000W Maximum instantaneous load.  5000W maximum long term load.
  • Includes digital output display making fine adjustments easy
  • Universal output plug

10 Reviews Hide Reviews Show Reviews

  • 3
    Need a response

    Posted by john reynolds on Sep 27th 2021

    If I decideded to power the controller with 220vac is there any modifications that need to be done to the controller ?
    And if powered by 220vac will the 1500w stainless steel cartridge heater be ok
    Cant give the best review at this time ,i have not used the second controller yet ,I need the qustion answered and then you can resend the review
    You would just need to replace the plug on the power cord to a 220V plug in order to run 220V in, but our 1500W heater is 110V, so if you run it on 220V you will burn it out.

  • 5

    Posted by Tom Coblentz on Aug 24th 2021

    Delivery was exceptional and product as described. I’m not quite ready to use it but looks like it’s what I need.

  • 5
    I’m happy

    Posted by scott hertzler on Jul 19th 2021

    It good

  • 5
    BrewHaus Heater Controller

    Posted by Neil E on Jul 10th 2021

    Outstanding controller. The Output Indicator makes it so easy to make 'fine' adjustments.

  • 5

    Posted by FLOYD BUTTRY on May 5th 2021


  • 5
    Updated review

    Posted by Sharlene on Apr 14th 2021

    After using this unit several times the concern I had on my original review went away. I was unable to update my prior review. The unit now adjusts the full range of voltage. Great product.

  • 3
    Nicely packaged controller

    Posted by Sharlene on Apr 8th 2021

    This is a very nicely packaged controller. And the ability to use this in both voltages is a big plus. The potentiometer on the unit I received does not give me much adjustability in the mid voltage range. It provides about 20% in the upper snd lower range only. I am rating this average because of this. That said, I have been unsuccessful finding good potentiometers for the ones I built at home. And this unit looks a whole lot better than my hand made versions!!

  • 5
    A great buy

    Posted by Joe on Feb 1st 2021

    Just used this on the Essential Extractor Pro Series II in pot still mode with one 1500W band heater. Once heated up, I dialed the power down and it held rock solid. I was very impressed how it dissipated the heat for something this compact. You can easily hold it in your hand, not too hot at all. The output indicator seems quite accurate enough too as I checked it with a multimeter. This was a good value, very pleased with it.

  • 4

    Posted by Anthony on Jan 18th 2021

    Was shipped very quickly and in working order. I cant wait to use it.