8 Gallon Essential Extractor Pot Distiller Moonshine Still Complete

  • Market price: $479.00, you save $69.01
  • $409.99
Score: 5.00 (votes: 6)
Reviews: 6
5.00 |
Qty:  

The Essential Extractor Pot Distiller is a complete stainless steel pot distillation unit for use in the traditional (pot) distillation mode. As with the entire Essential Extractor series, the Essential Extractor Pot Distiller is made from only the finest quality stainless steel dairy tubing and custom kettle parts.

Intended for use as a moonshine still or for distilling essential oils, Brewhaus' Complete Essential Extractor Pot Distiller features solid stainless steel construction. We do not use utility pails or dairy milk cans for our kettles, which are not intended for welding or heating.

Features: 

  • Runs in pot distillation mode only
  • 2" in diameter
  • Column is approz. 18" in height
  • Tri-Clamp ferrule on top of column
  • Made of dairy grade Stainless Steel beverage tubing

Includes:

  • Stainless steel kettle
  • Pot still column with condenser and 2" tri-clamp connector
  • 1 stainless steel tri-clamp
  • 1 EPDM chemical tolerant gasket
  • Hoses with hose clamps
  • Submersible pump
  • Pure tan gum bung
  • Your choice of thermometer

Recommendations:

  • To heat this unit, either one band heater or one internal heating element is sufficient.
  • Although an internal heater is the most efficient heat source, it also increases your risk of scorching when using grains.
  • If distilling alcohol, you'll need to insert a loosely-rolled strip of copper mesh in the column for the vapor to pass through. Roll it up tightly enough for it to stay in the column without dropping out, but not so tightly that it completely plugs the column.
  • If you don't like the bung, choose one of the Solar Digital thermometers as your thermometer upgrade. This comes with an end cap with 1/2" coupling that the thermometer screws into at the top of the column, getting rid of the bung completely.

*Most parts are laser welded.  For information on the benefits of laser welding click here.

 

Default Coupling Placement
# of CouplingsPlacement (to center from bottom)

8 Gallon15 Gallon
1 CouplingRear of kettle, 2" from bottomRear of kettle, 2" from bottom



2 CouplingsDrain- Rear of kettle, 2" from bottomDrain- Rear of kettle, 2" from bottom

Heater- Side of kettle, 2" from bottomHeater- Side of kettle, 5" from bottom



3 CouplingsDrain- Rear of kettle, 2" from bottomDrain- Rear of kettle, 2" from bottom

Heater- Side of kettle, 5" from bottomHeater- Side of kettle, 5" from bottom

Heater- Rear of kettle, 2" from bottomHeater- Rear of kettle, 2" from bottom
    • Weight
      40 lbs
    • SKU
      80001200-8
  • Type of System
    Complete
  • Type of Distillation
    Pot
  • Column Diameter
    2"
  • Column Length
    18"
  • Gin Basket
    Not Compatible
  • Kettle Size
    8 Gallon
  • Compatible Heating
    Internal (optional), Band Heater, Propane, Hotplate
  • Add 1" NPT Couplings to Kettle
    No Couplings, 1 Coupling, 2 Couplings, 3 Couplings
  • Add NPT Plugs
    No NPT Plugs, 1 NPT Plug, 2 NPT Plugs, 3 NPT Plugs
  • Thermometer
    Laboratory Thermometer, Digital Thermometer, Solar Digital Kit (Fahrenheit), Solar Digital Kit (Celsius)
Customer reviews
Average rating:
5.00 (Votes: 6)
Rating of votes (6)
5
 
6customers
4
 
 
0customers
3
 
 
0customers
2
 
 
0customers
1
 
 
0customers
 
Please sign in to add review
  • Jim Fall
    Jul 21, 2020, 12:00 AM
    15 gal pot still. Very well built. Pot is heavier than I expected
  • MarcosB
    Dec 15, 2018, 12:00 AM
    Pot Still Overall Impression. I score 5, but it is not perfect. The following is meant not to disparage but to point out problems to finally improve the product. The pump is good, but the plastic threaded adapter is far too fragile. The threaded end sheared while hand tightening. Second, the glass "lab grade" thermometer is not. At my elevation water boils at 211.5F. However, the thermometer indicated 218F. Hence, it is useless. Third, the clamp securing the top of the pot was slightly skewed requiring some effort to properly secure. Finally, expect delays in shipping as my unit was shipped 6 weeks after order. Do not let this deter your order - just be prepared for the delay.

    The product overall is an excellent value. The welds seem well done. The heat exchanger is effective when cool water is used. I highly recommend the product.
  • JT
    Aug 20, 2017, 12:00 AM
    15 gallon complete set up = fantastic. I ordered the 15 gallon complete pot still with the digital thermometer. No other add ons. Total time from placement of order to receipt was appx. 3 weeks. I called after 10 business days to inquire about the status of my order. Customer service was very friendly and explained that that each kettle and column was custom made to order and that mine was on the list to be made in the next few days. I received it within a week. I ran water through it, bringing it to steam to check for leaks and test the thermometer. Functioned great, not leaks. Only complaint was the thermometer. It didn't work upon receipt of the package. I had to pick up a battery, then once working, the temp reading was way off. It's a pretty cheap thermometer. I ended up buying a grilling thermometer with temp alarms. Save you $3 and skip the digital thermometer.

    I am 100 % pleased with the craftsmanship and quality of the rest of the still system. Recently completed my first run and am extremely happy with the results. Highly recommend this product!
  • Nicholas
    Jul 6, 2016, 12:00 AM
    Excellent. I'm impressed with the overall craftsmanship and simplicity of the design. The steel pot is surprisingly thick and heavy duty, I'm very happy with it. Did the first run today, everything is working perfectly.
  • Dana
    Mar 13, 2013, 12:00 AM
    WOW!!!. This little still is by far an excellent fabrication of all "stainless steel" components and with the directions supplied does a fabulous job of a constantly reliable product. If there is a rating above A+. This is well deserved. Thanks Rick and all!!! I recomend the 8 gal premium kettle as suggested by rick. Fits my turkey cooker base perfectly and heats right up to 180 in 40 mins. Best you can find anywhere for the nivice "extractor"

Customers who viewed this product bought