Essential Extractor Pot Distiller Moonshine Still- Column
This product is a part of the following bundle(s):
The Essential Extractor Pot Distiller Column is an 18" tall, 2" diameter, stainless steel column made for pot distillation.
Perfect for use as a moonshine still or for distilling essential oils, our Pot Distiller Column has a Tri-Clamp fitting welded to the bottom of the column, making it directly attachable to a standard US beer keg, or to another Tri-Clamp fitting.
Features:
- Runs in pot distillation mode only
- 2" in diameter
- Approx. 18" total height
- Tri-Clamp Ferrule on top of column
- Made of dairy grade Stainless Steel beverage tubing
Includes:
- 1 piece distillation column for use as a pot distiller only
- 1 stainless steel tri-clamp
- 1 EPDM chemical tolerant gasket
- 1 EPDM chemical tolerant O-ring for direct keg attachment
- Pure tan gum bung
- Your choice of thermometer
Notes: Does not include contents of Hose Pack. If distilling alcohol, you'll need to insert a loosely-rolled strip of copper mesh in the column for the vapor to pass through.
*Most parts are laser welded. For information on the benefits of laser welding click here.
-
Type of SystemColumn Only
-
Type of DistillationPot
-
Column Diameter2"
-
Column Length18"
-
Gin BasketNot Compatible
-
Kettle SizeNot Included
-
Compatible Heatingn/a
-
ThermometerLaboratory Thermometer, Digital Thermometer, Solar Digital Kit (Fahrenheit), Solar Digital Kit (Celsius)
Customer reviews
-
SchogNov 5, 2018, 12:00 AMMixed bag. The still itself is a five, no question. But the still to Sanke keg system is very hit and miss. I just spent a total of seven hours doing two runs that should have been two hours each. Sometimes the O-ring works great, but sometimes it doesn’t. The one that came with the kit worked fairly well, but it eventually gave way as O-rings tend to do. Got a pack of two inch O-rings to replace. Ended up going to three different stores even though, of course, they should all be the same. Something about the store bought ones just make getting a good seal very difficult. I have had to take lots of time stretching them to fit. Turn the heat on, vapor leaks. Try again. And so on. Sometimes for up to an hour. Always ends up working but it should not take this long. I gave in and bought their milk can because I’m tired of messing with it, maybe that’s what they wanted all along.
Reply from Brewhaus: The O-ring for tri-clamp ferrules is a special size, hence the issue in finding something suitable at a building supply store. This is not something of our doing, but the spec on an industry-standard fitting. -
christopherDec 5, 2014, 12:00 AMvery nice product. This a quality product very well made and the materials used are high quality. I was also impressed with the care taken in packaging. I will definitely be doing business with this company in the future.
-
slowpoke scottyJul 3, 2012, 12:00 AMI have had one for a few years. It is a fine unit and definitely excellent value. If you are getting steam from the liebig its not the unit, It's definitely you runnung too hot.
-
edwardApr 18, 2012, 12:00 AMnice looking but........ im running it for the first time and i haqve only one complant the condencer is way to short loosing steem where i should be getting strate product not running to hot but still the fule to product is to high and i may go back to my home made unit with the worm till i can order a nother with the 18 inch condencer i hope im not putting good money where it dont belong keep in mind my worn is 20 feet of coild up copper................ part two of the review im happy with the proof and amount overall but still not happy with the condencer putting out steem needs to be longer but i think ill stick with it and give it a nother star
-
BayouRulerJul 21, 2010, 12:00 AMHigh Quality. This little Column is made of quality materials and constructed with quality workmanship. Well worth the money!