Stainless Steel Parrot

MSRP: $99.99
(You save $10.00 )
(15 reviews) Write a Review
Built to order, ships within 2 weeks
Calculated at Checkout

Brewhaus' 12" tall Stainless Steel Distiller's Parrot is for proof testing inline as you distill. The Distiller's Parrot is connected between the condenser and collection container, which allows the distillate to flow through on its way to the collection container.

Although not required in order to start distilling, it's an added convenience to use the Distiller's Parrot to hold your alcoholmeter and take real-time readings of your alcohol percentage during the distillation process. Without a parrot, you collect your distillate in a collection container and then use the alcoholmeter to test what you've collected. The goal is to test the alcohol percentage/proof of the distillate as you go and use that percentage as a guide (along with temperature) to decide where to make your cuts.

The Distiller's Parrot attaches to condensers on most moonshine stills regardless whether you are using a pot distiller column, a reflux column, or a gin series column. Note that our Flute Moonshine Stills have a built-in Distiller's Parrot, so you do not need to order an additional parrot if you have one of our flute distillation columns.

Made in the USA by Brewhaus

15 Reviews Hide Reviews Show Reviews

  • 4

    Posted by Bruce on Sep 25th 2019

    What should have gotten a 5 for a rating as it’s a great product but I think a few steps in production were missed .
    None of the open pipe ends were deburred , I was able to do that with a drill and a few different drill bits and debuting tools to remove the sharp edges .
    I’m sure this was just an oversight in the manufacturing process and I hope your manager in charge sees this and checks to see if other ones have had this step missed as well .

  • 3
    good construction

    Posted by patrick on Sep 23rd 2019

    why would you design a parrot that requires a hose to connect. a simple collection cup on top would have made life easier, my bad on ordering, now I'm retrofitting

  • 5
    well made product

    Posted by norm vachon on Jul 23rd 2019

    well made will get many years out of it

  • 5
    stainless steel parrot

    Posted by Bill on May 13th 2019

    I am very pleased with this product

  • 5

    Posted by Jack on Jun 13th 2018

    I am so happy that I bought this Parrot. It makes it so easy to do a run. Great quality product.

  • 5
    this thing is a MUST, particularly if you are running without a temperature control.

    Posted by David Howard on Mar 28th 2018

    Provides an instantaneous proof reading for efficient cuts. A must.

  • 5
    Stainless Steel Parrot

    Posted by Norm on Jan 20th 2018

    Have not used yet but finish of product is great

  • 5

    Posted by Jason on Oct 23rd 2017

    Love it!

  • 4
    Warped base

    Posted by Docbot on Jan 26th 2017

    Great addition to my kit but it has one manufacturing defect - the base is warped. It will not sit steady on a flat surface. It rocks, if you know what I mean! My guess is that the base got overheated in the welding process. I think I would still recommend it but I think for real stability you will need to make some wooden or other custom base that makes it more stable.