The Keg Kit for our Essential Extractor PSII High Volume Gin Series Distiller includes all of the items in our Complete Unit, with a Keg Adapter (including clamp and o-ring for keg) in place of our kettle. The high-capacity column is 3″ in diameter, allowing you to distill at more than twice the speed of standard 2″ distillation columns while maintaining the highest possible purity.
Brewhaus’ Essential Extractor Pro Series II High Volume Gin Series column features a unique 4-piece design that enables the distiller to perform either pot distillation, reflux distillation, or infusions in one step. Use the full-length, 4-piece column for reflux mode (e.g., fuel alcohol, vodka) or infusions, or just use one column section for pot mode (e.g., essential oils, whisky, water).
About the Pro Series’ Cooling System:
By placing the cooling lines near the top of the distillation column, reflux is created where it is intended- at the top of the tower. This allows for the most effective use of the column filling by causing the refluxed liquid to flow down through it, resulting in a cleaner distillate. Crossing the cooling lines instead of leaving them parallel results in a much more efficient cooling system, requiring less cooling water while maintaining effectiveness. And, by having the cooling system in direct contact with the rising vapor you achieve a far more efficient and effective cooling than systems that surround a column with a cooling water jacket. The slow heat transfer rate through the thick column wall is much less efficient, and concentrates all of the cooling ability around the outside of the distiller column. The result of jacketed columns is liquid channeling down the walls of the column, while not cooling the majority of the vapor as it is not in contact with the column wall. While such a system may operate faster, it is at the expense of quality. Learn more about the design of this forced reflux still here.
Features:
- Runs in reflux mode, pot distillation mode, alembic mode, and does one-step flavor infusion
- 3″ in diameter, making it capable of distilling at more than twice the speed of standard 2″ columns
- Approx 4′ total height
- Made of dairy grade Stainless Steel beverage tubing
- Tri-Clamp ferrule on top of column
- Can be packed with either copper mesh for distilling alcohol, or ceramic Raschig rings for distilling water or essential oils
- Can be attached to a standard-sized beer keg
Includes:
- 4-piece stainless steel column (gin basket, condenser, dephlegmator, column)
- 4 stainless steel tri-clamps
- 4 EPDM chemical tolerant gaskets
- Tri-Clamp reducer with corresponding clamp and o-ring for keg
- Hoses with hose clamps
- Submersible pump
- Water control system
- Your choice of column packing
- Pure tan gum bung
- Your choice of thermometer
*Most parts are laser welded. For information on the benefits of laser welding click here.
| Weight | 41.5 lbs |
|---|---|
| Column Diameter | 3" |
| Type of Distillation | Reflux / Pot / Infusion |
| Type of System | Keg Kit |
| Gin Basket | Included |
Be the first to review “Essential Extractor High Volume Gin Series Keg Kit”
Shipping Policy
Order Processing
Orders are typically processed within 1–5 business days after payment is confirmed.
Processing times may vary depending on the product type, availability, or order volume.
Vendors are not responsible for delays caused by events outside their control (e.g., carrier delays, customs, weather, or force majeure).
Shipping Methods & Delivery Times
Vendors may use third-party shipping carriers of their choice.
Estimated delivery times are provided for reference only and are not guaranteed.
International orders may be subject to customs clearance, duties, or taxes, which are the responsibility of the buyer unless otherwise stated.
Shipping Costs
Shipping costs, if applicable, are calculated and displayed at checkout.
Any additional charges such as customs fees, import duties, or local taxes are the buyer’s responsibility.
Order Tracking
Where available, tracking information will be provided once the order has shipped.
Vendors are not responsible for packages marked as “delivered” by the carrier.
Incorrect Address or Failed Delivery
Buyers are responsible for providing accurate shipping information.
Orders returned due to incorrect addresses, refused delivery, or failed delivery attempts may require additional shipping fees to be resent.
Refund Policy
Eligibility for Refunds
Refunds may be issued in the following circumstances:
The item arrives damaged or defective
The item received is incorrect or significantly different from the description
The order was cancelled within the allowable cancellation period, if applicable
Non-Refundable Items
Unless required by law, the following are generally non-refundable:
Digital products or downloadable content once accessed
Personalized or custom-made items
Items marked as final sale or clearance
Items returned used, altered, or not in original condition
Refund Process
Refund requests must be submitted within 7–14 days of delivery, unless otherwise stated.
Approved refunds will be issued to the original payment method.
Processing times may vary depending on payment providers and banks.
Shipping Costs
Original shipping fees are non-refundable unless the return is due to vendor error.
Return shipping costs are the buyer’s responsibility unless the item is defective or incorrect.
Cancellation / Return / Exchange Policy
Order Cancellations
Orders may be cancelled before shipment.
Once an order has shipped, it can no longer be cancelled and must follow the return process instead.
Custom or made-to-order items may not be eligible for cancellation once production has begun.
Returns
Return requests must be initiated within 7–14 days of delivery.
Items must be returned in their original condition, unused, and with all original packaging.
Vendors reserve the right to deny returns that do not meet these conditions.
Exchanges
Exchanges may be offered for defective or incorrect items, subject to product availability.
Buyers may be responsible for additional shipping costs associated with exchanges unless the issue was caused by vendor error.
Return Shipping
Buyers are responsible for return shipping costs unless the return is due to a defective, damaged, or incorrect item.
Vendors are not responsible for lost or damaged return shipments without tracking.
General Inquiries
There are no inquiries yet.
Related products
Reviews
There are no reviews yet.