15 Gallon 4" Complete Flute Moonshine Still with Copper Bubble Plates, 6 section
Includes the following:
- 4" Distillation Flute Column with Copper Bubble Plates- 4 Sections
- 2 x 4" Bubble Plate Add-on Section
- Premium Kettle- 15 gallon- ETA 12/10/24
- Hose Pack for Flute Distillation Column
- Submersible Water Pump
You save: $34.95
Brewhaus' 4" Flute Column Still incorporates individual sections to allow for the greatest degree of versatility- run as few or as many sections as you need depending on what you are producing, power of heat source, etc. Includes 6 column sections and upgraded copper bubble plates in place of perforated copper plates at no additional charge. The large 3" diameter sight glasses give you a large viewing area to see the action taking place! Learn more about our flute columns here.
Features:
- Runs in reflux mode or pot distillation mode
- Completely modular design for ultimate in flexibility
- 4" in diameter
- More than 4' total height
- Built-in inline parrot
Includes:
- Stainless steel kettle
- 4-section flute distillers column with inline parrot, condenser, dephlegmator, reducer
- 8 Stainless steel 4" tri-clamps with EPDM chemical tolerant gaskets
- 3 Stainless steel 2" tri-clamps
- 1 Stainless steel 1/2" tri-clamp
- Hoses with hose clamps
- Submersible pump
- Water control system
- Solar digital thermometer
Recommendations:
- To heat this unit, either two band heaters or two internal heating elements is sufficient, although some customers use 3 heaters for more power.
| Default Coupling Placement | ||
| # of Couplings | Placement (to center from bottom) | |
| 8 Gallon | 15 Gallon | |
| 1 Coupling | Rear of kettle, 2" from bottom | Rear of kettle, 2" from bottom |
| 2 Couplings | Drain- Rear of kettle, 2" from bottom | Drain- Rear of kettle, 2" from bottom |
| Heater- Side of kettle, 2" from bottom | Heater- Side of kettle, 5" from bottom | |
| 3 Couplings | Drain- Rear of kettle, 2" from bottom | Drain- Rear of kettle, 2" from bottom |
| Heater- Side of kettle, 5" from bottom | Heater- Side of kettle, 5" from bottom | |
| Heater- Rear of kettle, 2" from bottom | Heater- Rear of kettle, 2" from bottom | |
-
Type of SystemComplete
-
Type of DistillationReflux, Pot
-
Column Diameter4"
-
Column Length46" - 50"
-
Gin BasketCompatible
-
Kettle Size15 Gallon
-
Compatible HeatingInternal (optional), Band Heater, Propane, Hotplate
-
Add 1" NPT Couplings to KettleNo Couplings, 1 Coupling, 2 Couplings, 3 Couplings
-
Add NPT PlugsNo NPT Plugs, 1 NPT Plug, 2 NPT Plugs, 3 NPT Plugs
-
ThermometerSolar Digital (Fahrenheit), Solar Digital (Celsius)
Customer reviews
-
Anonymous reviewerMar 6, 2018, 12:00 AMGreat System. This still is all you need in a neatly packed and modular system.
Plates are far easier to monitor than packing. And with the segmented design you can easily configure it from neutral spirit to pot still and anything in between. -
BudFeb 5, 2017, 12:00 AMVery High Tech Compared To My Old Packed Column. All I have to say about this system is WOW This thing is a beauty and works super good. I put 3 band heaters on the pot and there's no way to overload this column. One thing I love about the sight glasses is towards the end of the run you can actually see when the tailings start working up the column by the seeing moisture on the glass. Before you couldn't tell until it was too late and you could smell the tailings coming out. With the 6 sections this is some pure stuff coming out and being able to monitor proof the whole time is really great. As tailings go up the column and the proof starts going down switch collection vessels to separate. I shut it off when the tailings were at 85%. I might could have gone longer but wasn't sure. It's easy to clean afterwards becuase because the whole thing breaks down. Fine, high tech piece of equipment. Rick was a big help with questions too. This system was well worth the investment in my opinion.
